Lenovo ThinkPad 1838 User Manual page 57

Use any one of these cards to extend the storage capability of your tablet. You also can use these cards to
share data with a computer or other device that supports these card formats.
To locate the 3-in-1 media card reader, see "Tablet layout" on page 1.
Inserting a flash media card
Attention: Before handling a flash media card, touch a metal table or a grounded metal object. This action
reduces any static electricity from your body. Static electricity can damage the card.
To insert a flash media card into the 3-in-1 media card reader, do the following:
1. Open the card reader cover and locate the 3-in-1 media card reader.
2. Make sure that the metal contacts of the card are facing down and pointing toward the tablet.
3. Insert the card firmly into the 3-in-1 media card reader until you hear a click. The card might stop
before it is completely installed into the card reader.
When a flash media card is inserted into the 3-in-1 media card reader, a pop-up message is displayed asking
if you want to display the contents on the card. To display the contents, touch Start Utility. Otherwise,
touch Don't start.
Removing a flash media card
To remove a flash media card, do the following:
1. Open the slot cover.
2. Push the flash media card inward a little until you hear a click; then, release it. The flash media card
pops out.
3. Gently slide the card out of the card reader.
.
Chapter 5 Using your tablet
49