Table of Contents
Advertisement
Setting
Continued
■
Detail Settings
This setting function is designed mainly for persons in charge of information system department and network
administrators, enabling more detailed setting changes.
●
Wireless Channel
Sets the Wireless channel. This product provides the following options.
●
Signal Strength (Firmware version 1.12412.676 and later)
Sets the strength.
Configure this setting to suppress the interference of radio waves generated when multiple
transmitters and receivers are installed in proximity.
Select [Signal Strength] on the [Detail Settings] screen.
Set the strength.
34
English
Channel
Bandwidth
* Note that when the receiver is connected to an external wireless access
point, the Wireless channel cannot be set.
The transmitters connected to the receiver are displayed in
the list.
Select a device to be set.
To apply the same setting to the receiver and all
transmitters, select [All(RX+TX)].
High: Sets the strength of the wireless to the maximum.
Mid:
Sets the strength to 70%.
Low: Sets the strength to 40%.
Advertisement
Table of Contents
