Completing The Parts Replacement - Lenovo ThinkCentre A70 7099 Hardware Maintenance Manual

Completing the parts replacement

After completing the installation or replacement for all parts, you need to reinstall
the computer cover and reconnect cables.
To reinstall the computer cover and reconnect cables to your computer, do the
following:
1. Make sure that all components have been reassembled correctly and that no
2. Make sure that all the internal cables are routed properly to avoid interference
Figure 76. Cable routing (For a clear illustration of the cable routing, some components are
not shown here.)
3. Lower the drive bay assembly. See "Accessing the system board components
4. Reinstall the front bezel. See "Removing and reinstalling the front bezel" on
tools or loose screws are left inside your computer. See "Locating components"
on page 119 for the locations of the various components in your computer.
with lowering the drive bay assembly and closing the computer cover. Keep the
cables clear of the hinges and sides of the chassis.
and drives" on page 125.
page 123.
Chapter 9. Replacing FRUs - Desktop computers
157