Table of Contents
Advertisement
56
Hardware Maintenance Manual
Diagnostic Error Code
001-024-XXX
System Addressing test failure
001-025-XXX
System Checksum Value error
001-026-XXX
System FLASH data error
001-027-XXX
System Configuration/Setup error
001-032-XXX
System Device Controller failure
001-034-XXX
System Device Buffer Allocation failure
001-035-XXX
System Device Reset condition detected
001-036-XXX
System Register error
001-038-XXX
System Extension failure
001-039-XXX
System DMI data structure error
001-040-XXX
System IRQ failure
001-041-XXX
System DMA failure
001-195-XXX
System Test aborted by user
001-196-XXX
System test halt, error threshold exceeded
FRU/Action
System board
1. Flash the system. See "Updating
(flashing) the BIOS from a disc" on page
180
2. System board
1. Flash the system. See "Updating
(flashing) the BIOS from a disc" on page
180
2. System board
1. Run Setup
2. Flash the system. See "Updating
(flashing) the BIOS from a disc" on page
180
3. System board
System board
1. Reboot the system
2. Flash the system. See "Updating
(flashing) the BIOS from a disc" on page
180
3. Run memory test
4. System board
System board
System board
1. Adapter card
2. System board
1. Flash the system. See "Updating
(flashing) the BIOS from a disc" on page
180
2. System board
1. Power-off/on system and re-test
2. System board
1. Power-off/on system and re-test
2. System board
Information only
Re-start the test, if necessary
1. Press F3 to review the log file
2. Re-start the test to reset the log file
Hide quick links:
Advertisement
Table of Contents
