Table of Contents
Advertisement
Step 3: Hang TV on to the Wall Plate
A. Carefully lift the TV and place arm hooks over and onto angled lip in Wall
Plate (Figure 7). Do not release the TV until it is completely connected to the
Wall Plate.
B. Gently press on the bottom of the TV to lock the arms onto the wall bracket (Figure 8).
Figure 6
Figure 7
Wire Management Kickstands
The SM-RAZOR-F mounts are equipped with a kickstand that provides space
between the TV and the wall for connecting or disconnecting cabling.
Note: These kickstands are provided for servicing only. It is recommended that they are
collapsed and the arms locked during normal placement.
A. Pull down on the rings at the bottom
of the arms to release them from the
wall bracket.
B. Pull the kickstands out on each arm so
that they rest on the wall (Figure 9).
C. When finished, collapse the kickstands
to allow the arms to lock onto the wall
bracket.
© 2015 Strong
TM
SM-RAZOR-F Instruction Manual
Figure 8
Installing
Figure 8
Figure 9
Locked
pg.7
Advertisement
Table of Contents
