Advertisement
Quick Links
Biological Microscope
STM-2010 Series
Instruction Manual
This manual is for users of biological microscope STM -2010 Series . To ensure the safety ,
obtain optimum performance
and to familiarize
yourself fully with the use of this
microscope , it is recommended strongly that you study this manual thoroughly before
operating the microscope. Retain this instruction manual in an easily accessible place near
the microscope for further reference
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Stalwart STM-2010 Series
Summary of Contents for Stalwart STM-2010 Series
- Page 1 Biological Microscope STM-2010 Series Instruction Manual This manual is for users of biological microscope STM -2010 Series . To ensure the safety , obtain optimum performance and to familiarize yourself fully with the use of this microscope , it is recommended strongly that you study this manual thoroughly before operating the microscope.
- Page 2 Eyepiece Monocular Head Objective Coarse Focusing Knob Stage Fine Focusing Knob Condenser Brightness Adjustment Knob Collector Main Switch STM-2010D...
- Page 3 Knob STM-2010E 1 Appliance STM-2010 series biological microscope is widely used in medical and hygienic establishments for conventional microscopic examination , general biologic , pathologic and bacteriological studies, clinical investigations and classroom demonstrations. Designed in a very modern way what can take convenient and safe to your operations.
-
Page 4: Specification
2 Specification 2.1 Mechanical tube length：160mm 2.2 Objective： Magnification Numerical Focus Working Remark Aperture Distance Distanc （NA） (mm) (mm) 0.10 31.05 0.25 17.13 0.65 4.65 0.53 100X 1.25 2.906 0.13 2.3 Eyepiece TYPE Magnificatio Field of view (mm) Focus Distance(mm) Plan Eyepiece Ø18 2.4Total Magnification... - Page 5 3 Outfits STM-2010 STM-2010 STM-2010 STM-2010 Component Specification Name Viewing Monocular Head, Standard Standard Standard Optional Head inclined at 45° Sliding Binocular Optional Optional Head,Inclined at Optional Standard 45° Eyepiece Wide Field Standard Standard Standard Standard Eyepiece WF10X Eyepiece Optional Optional Optional Optional WF5X,P16X...
- Page 6 Slide Clips 110× 120mm Attachable Mechanical Stage Optional Standard Optional Optional 110 × 120mm / 60 × Stage 30mm Double Layers Mechanical Optional Optional Standard Standard Stage125×115mm / 70×20mm LED Illumination, Standard Standard Standard Standard Illumination Brightness Adjustable Mirror Optional Optional Optional Optional...
- Page 7 5 Assembly a) Working environment requirement： 1) Room temperature: 0-40℃. Maximum comparatively humidity: 85%. 2） High temperature will result in mildew, dew and even ruinous instrument. Avoid from the dust room. When it is not in use, please cover the microscope with dust cover.
-
Page 8: Operation
h) Color filter： Lay the filter into the iris diaphragm bracket under the condenser if necessary. 6 Operation Insert the eyepiece into the inclined eyepiece tube, then rotate the objectives 1、 in sequence, according to their magnifications, into the threaded holes of the nosepiece. - Page 9 action as needed. If you cannot solve the problem after checking the entire list, please contact the service department for assistance. 1、Optical Part Problem Cause Solution the edge of the field of The nosepiece is not in he located Turn right view has shadow or the position(objective is...
- Page 10 Use a unsuitable oil Change specified one The size of the aperture Minify it diaphragm is too big There are stains on the incident Clean it up lens of the binocular tube size aperture Open it up diaphragm is too small The position of the condenser is Adjust the position too low...
- Page 11 The eyes is too tired No diopter adjustment Adjust the diopter correctly brightness Adjust the voltage of the suitable lamp 3、Electrical Part Problem Cause Solution Check the connection of the No power The lamp can’t light power cord when turning on the The bulb is not inserted Insert it correctly switch...
Need help?
Do you have a question about the STM-2010 Series and is the answer not in the manual?
Questions and answers