Boiler Fixing - Riello G5 Installation, Use And Maintenance Instructions

BOILER FIXING

BURNER FIXING AND
It is necessary that the insulating gasket
HINGE ASSEMBLY
(9, fig. 1) is placed between the boiler door
and the burner flange.
This insulating gasket has six holes,
which, if necessary, can be modified as
shown on the drawing on the right.
D5242
Verify that the installed
burner is lightly leaned
towards the button.
Fig. 2
(See figure 2).
The burner is designed to
allow entry of the flexible
oil-lines on either side of
the burner.
S7384
D5572
3 GB
20013752