Advertisement
Quick Links
INSTALLATION GUIDE
Switch System
Boardroom
Size: 3200mm x 1100mm
Tools Required: Power screwdriver.
Note: Please ignore any pre-drilled holes or nut inserts that maybe present in your top(s). They will not match your particular
table/desk base and woods screws will be required to be screwed directly into the underside of the top.
Note: It is important to fully tighten all bolts and screws before attaching the top(s) so that the frame is su ciently rigid.
Failure to do this may a ect stability once the tops are attached.
www.jasonl.com.au
Need help!
Call us on
1300 527 665
Page 1 of 4
Advertisement
Related Manuals for Jason.L Switch System Boardroom
Summary of Contents for Jason.L Switch System Boardroom
- Page 1 www.jasonl.com.au INSTALLATION GUIDE Switch System Need help! Call us on Boardroom 1300 527 665 Size: 3200mm x 1100mm Tools Required: Power screwdriver. Note: Please ignore any pre-drilled holes or nut inserts that maybe present in your top(s). They will not match your particular table/desk base and woods screws will be required to be screwed directly into the underside of the top.
-
Page 2: Need Help
www.jasonl.com.au INSTALLATION GUIDE Switch System Need help! Call us on Boardroom 1300 527 665 Size: 3200mm x 1100mm COMPONENTS Table Top x2 (1600x1100mm) Leg x6 Leg Bracket x6 Beam Bracket x12 Switch Beam x3 (625mm) Switch Beam x4 (1315mm) L-Bracket x12 SCREWS Hex Nut x6 L-Bracket screws x12... - Page 3 www.jasonl.com.au INSTALLATION GUIDE Switch System Need help! Call us on Boardroom 1300 527 665 Size: 3200mm x 1100mm Join Leg Brackets to each Leg using screws to secure them, as follow. Join 2 L-Bracket through each 625mm Beam and 1 L-Bracket through each 1315mm Beam Securely connect each Beam to each Beam Bracket.
- Page 4 www.jasonl.com.au INSTALLATION GUIDE Switch System Need help! Call us on Boardroom 1300 527 665 Size: 3200mm x 1100mm Position as presented, and proceed to screw to ensure each corner of the frame. If this bolt does not drop into the joint use the Allen key to screw it all the way in so that it creates its own thread.
- Page 5 www.jasonl.com.au INSTALLATION GUIDE Switch System Need help! Call us on Boardroom 1300 527 665 Size: 3200mm x 1100mm Note: It is important to fully tighten all bolts and screws before attaching the top(s) so that the frame is su ciently rigid. Failure to do this may a ect stability once the tops are attached.