English Adjustment (see page 7) Safety Notes Gloves should be worn during installation to prevent To adjust the hot water limiter. Using a hot water limiter in combination with a continuous flow water heater is not crushing and cutting injuries. The product may only be used for bathing, hygienic recommended. and body cleaning purposes. Maintenance (see page 10) The hot and cold supplies must be of equal pressures. The check valves must be checked regularly according to Installation Instructions EN 806-5 in accordance with national or regional • Prior to installation, inspect the product for transport regulations (at least once a year). damages. After it has been installed, no transport or Dimensions (see page 11) surface damage will be honoured. • The pipes and the fixture must be installed, flushed Flow diagram (see page 11) and tested as per the applicable standards. • The plumbing codes applicable in the respective Spare parts (see page 12) countries must be observed. XX = Colors • The drain valve may only be installed in basins with 00 = Chrome Plated an overflow opening.
Page 4
(3 Nm) SW 8 mm SW 19 mm (4 Nm) (4 Nm) SW 24 mm (4 Nm)
English • After cleaning rinse thoroughly with clean water to Cleaning Recommendation for Hans- remove any cleaner residue. grohe Products • The use of steam cleaners is not permitted. The high Today, modern sanitary and kitchen tapware, showers, temperatures can damage the products. accessories, washstands, tubs and radiators consist of Important very different materials to comply with the needs of the...