Advertisement
7,8. TUNE/SEEK/TRACK/SKIP UP BUTTON
1). During RADIO mode, press ^ button to seek automatically for a stronger
station of higher frequency; After pressing ^ button hold for more than 2
seconds to tune up manually for the desired radio station by pressing ^.
2). During CD mode, press ^ button to track forwards. Hold it to skip forwards.
TUNE/SEEK/TRACK/SKIP DOWN BUTTON
1). During RADIO mode, press v button to seek automatically for a stronger
station of lower frequency; After pressing v button hold for more than 2
seconds to tune down manually for the desired radio station by pressing
v button .
2). During CD mode, press v button to track backwards. Hold it to skip
backwards.
9. LOCAL/DISTANCE BUTTON
In RADIO mode, when the signal of the distance radio station are
very weak and the receiving effect is bad during tuning, check
whether there is the word LOC on LCD. If there is the word LOC on
LCD, press this button to turn off the LOC function, then tune again
for the distance radio station; when the signal of the local radio
station are too strong to lead that the interference to the receiving
local radio station is very strong during tuning, press this button
to turn on the LOC function to display the word LOC on LCD, then
tune again for the local radio station.
10.MODE BUTTON
Press it repeatedly to select CDP, AUX and RADIO mode in sequence and
circulation.
11.CLOCK BUTTON
Press it to display time on LCD for few seconds.
Press it hold and then press ^ or v button to adjust hour or minute.
12.AS/PS BUTTON
In radio mode:
When short pressing, the radio searches for each preset station.
When the field strength level is more than the threshold level of
stop level, the radio is holding at that preset number for few
secretary with releasing mute, and than searches again. In FM
band, FM 1,FM 2 and FM 3 is checked one at a time.
When long pressing (more than 1 second), the radio searches from
the current frequency and checks the signal strength level until 1
cycle search is finished. And then 6 strongest stations are preset
to the corresponding preset number. The AS operation is
implemented in the each band of selected band. When the AS
operation is finished, the radio executes the preset scan.
3
DISC PLAY:
Cleaning discs:
Before playing, clean the disc with a clean, lint-free.
Flip the disc in the direction of the arrow.
NOTE:
. Do not use so solvents such as benzine, thinners. Commercially available cleaners
or anti static spray damage the unit.
. Insert a disc with the label surface down. Doing so may damage the unit.
NOTE:
. Do not try to insert another disc when one has been already inserted. Doing so may
damage the unit.
. Handle the disc by its edge. And to keep the disc clean, do not touch the surface.
.Do not stick paper or tape on the disc.
.Do not expose the disc to direct sunlight or heat sources such as hot air ducts. Or
leave it in a car parked in direct sunlight where there can be a considerable rise
in temperature.
Label
surface up
8
Advertisement
