Control Page - Midea CCM-180A/WS Service Manual

CCM-180A/WS

4.2 Control Page

This section describes the functions and operations of the Control page.
Figure 11 Homepage 1 of the Control Page
4.2.1 Select/Deselect All IDUs
Tap the "Select All" position marked "1" in Figure 11. If the tick is displayed in blue, all the IDUs are selected. Tap the
"Select All" position. The tick changes to gray, indicating that no IDU is selected.
4.2.2 Choosing IDU Group
Tap the position marked "2" in Figure 11 to open the drop-down menu, as shown below. Select the set IDU group for group
control. Group editing is detailed on the installation interface in section 3.5.
Figure 12
4.2.3 Sorting IDUs in Order
Tap the position marked "3" in Figure 11, as shown in the following figure. You can select whether to sort the IDUs by
name, operating mode or model.
12 201803