Midea CCM-180A/WS Service Manual page 41

CCM-180A/WS
4.6.9 Setting Mode Priority
The setting is valid for new generation ODU. Only the installation technician and administrator can perform the operation.
For the options description, see Table 14.
4.6.10 Setting Auto Energy Saving
The setting is valid for new generation ODU. Only the installation technician and administrator can perform the operation.
For the options description, see Table 14.
Table 14 Set DIP table and centralized controller options of new generation ODU
Definition
Power Restriction
Mode
40
ODU parameter
n41: Power limitation mode 1 (Only available for
the master unit, 100% capacity output)
n42: Power limitation mode 2 (Only available for
the master unit, 90% capacity output)
n43: Power limitation mode 3 (Only available for
the master unit, 80% capacity output)
n44: Power limitation mode 4 (Only available for
the master unit, 70% capacity output)
n45: Power limitation mode 5 (Only available for Grade 4
Figure 56
Figure 57
Centralized Controller
Options
Grade 0
Grade 1
Grade 2
Grade 3
201803