Time Zone Setting; Dst On/Off Setting; Radio-Controlled Time On/Off Setting; 12/24-Hour Time Mode Setting - La Crosse Technology WS-7394U Instruction Manual

2. "lcd" will appear at the top of the display and a number will flash
next to it.
3. Press and release the "OUT/+" button to select the desired LCD
contrast setting.
4. Press and release the "SET" button to confirm the LCD contrast
setting and continue to the Time Zone setting.
C. Time Zone Setting
1. Press and hold the "SET" button for five seconds.
2. "lcd" will appear at the top of the display and a number will flash
next to it.
3. Press and release the "SET" button once more to advance to the

Time Zone setting.

4. A number will flash to the left of the letter "h" at the top of the display
just below the time display.
5. Press and release the "OUT+" button to select the desired time
zone.
6. Press and release the "SET" button to confirm the Time Zone set-
ting and continue to the DST ON/OFF setting.
D. DST ON/OFF Setting
1. Press and hold the "SET" button for five seconds.
2. "lcd" will appear at the top of the display and a number will flash
next to it.
3. Press and release the "SET" button twice more to advance to the

DST ON/OFF setting.

4. "DST" will appear above the indoor temperature/humidity display
and "ON" or "OFF" will flash above that.
5. Press and release the "OUT/+" button to select DST ON/OFF.
GB
P.9
Note: Some locations (Arizona and parts of Indiana) do not follow
Daylight Saving Time.
6. Press and release the "SET" button to confirm the DST ON/OFF
setting and continue to the Radio-controlled Time ON/OFF setting.
E. Radio-controlled Time ON/OFF Setting
1. Press and hold the "SET" button for five seconds.
2. "lcd" will appear at the top of the display and a number will flash
next to it.
3. Press and release the "SET" button three more times to advance to
the Radio-controlled time ON/OFF setting.
4. "RCC" will appear above the indoor temperature/humidity display
and "ON" or "OFF" will flash above that.
5. Press and release the "OUT/+" button to select Radio-controlled
time ON/OFF setting.
6. Press and release the "SET" button to confirm the Radio-controlled
time ON/OFF setting and continue to the 12/24-hour Time Mode
setting.
F. 12/24-hour Time Mode
1. Press and hold the "SET" button for five seconds.
2. "lcd" will appear at the top of the display and a number will flash
next to it.
3. Press and release the "SET" button four more times to advance to
the 12/24-hour time mode setting.
4. "12h" or "24h" will flash above the indoor temperature/humidity
display.
5. Press and release the "OUT/+" button to select 12 or 24-hour time
mode.
GB
P.10