Table of Contents
Advertisement
seconds, and reinstall making sure to install batteries into the
remote temperature/humidity sensor first.
PROGRAM MODE
Programming Note: If 30 seconds is allowed to pass, or the IN/OUT,
SET/CH button is pressed during the programming mode, the unit will
confirm/set the last information entered—the display will stop flashing and
return to normal time-date readings. If you don't leave the program mode
during the programming of sections IV through VI, you can advance to step
4 of the next program setting. If you do leave the program setting (or want
to program a specific setting) follow each instructional step to program that
setting.
I.
PROGRAMMING SEQUENCE AND DEFAULT SETTINGS
The programming sequence and default (factory) settings are as
follows:
Temperature Format
12/24-hour time
Time
Year
Date and Month
°F
12
12:00
2003
1.1.
6
Advertisement
Table of Contents
