Safety ......................3 General Information ..................4 Getting Started....................5 Operation ......................7 Specifications ....................9 How to choose the right mode for mixing ..........11 Maintenance ....................12 Guarantee and service ................13 Declaration of Conformity .................14 MPS-1 Version 1.01 - November 2013 Page 2 Operating instructions...
Do not exceed the maximum load value mentioned in the Specifications section. BIOLOGICAL SAFETY It is the user's responsibility to carry out appropriate decontamination if hazardous material is spilt on or penetrates into the equipme MPS-1 Version 1.01 - November 2013 Operating instructions Page 3...
0.5 to 50ml in size. The MPS-1 is compact, user friendly and ideal for personal use. It can be used in a wide range of applications including DNA/RNA isolation, pellet resuspension and ELISA.
Examine the unit carefully for any damage incurred during transit. The warranty does not cover in-transit damage. 3.2. Package contents Standard set MPS-1 high–speed multi plate shaker · with universal platform/plate holder u ............1 piece external power supply unit ................1 piece ·...
Page 6
12 V socket at the rear side of the unit. · 3.4. Platform or plate installation Install the platform or plate by inserting it in the universal platform/plate holder (fig.1). Fig.1 Platform or plate installation MPS-1 Version 1.01 - November 2013 Page 6 Operating instructions...
4. Operation MPS-1 3200 00:00 Pulse Mode STOP CUSTOM Fig. 2 Control panel Recommendations during operation Caution! Please check the tubes/pl ates before using, be sure that they are properly sealed. Unsealed tubes or plates may spill the contents during operation causing potential health risks when working with infected material.
Page 8
4.14. After finishing the operation, turn the unit off using the power switch at the rear panel (position O) and disconnect the external power supply unit from electric circuit. MPS-1 Version 1.01 - November 2013 Page 8 Operating instructions...
Input current/power consumption ............12 V, 800 mA / 10 W · External power supply unit ......input AC 100-240 V 50/60 Hz output DC 12 V · Weight* ........................5.1 kg · * Accurate within ±10%. MPS-1 Version 1.01 - November 2013 Operating instructions Page 9...
Page 10
24 tubes 0.5 ml and 48 tubes 0.2 ml Grant is committed to a continuous programme of improvement and reserves the right to alter design and specifications of the equipment without additional notice. MPS-1 Version 1.01 - November 2013 Page 10...
24 x 0.5 and 48 x 0.2 ml (full) Platform P-02-96+strips / PCR plate 96 x 0.2 ml (full) *It is recommended that test tubes are filled up to 75% of the maximum volume for optimum mixing. MPS-1 Version 1.01 - November 2013 Operating instructions Page 11...
Before using any other cleaning/decontamination method other than that recommended, check with our service department (or distributor if outside of the UK), that the proposed method will not damage the equipment. MPS-1 Version 1.01 - November 2013 Page 12 Operating instructions...
TWO YEARS against faulty materials or workmanship. Service For service, return for repair to our Service Department in the UK or, in other countries, to our distributor. MPS-1 Version 1.01 - November 2013 Operating instructions Page 13...
Need help?
Do you have a question about the MPS-1 and is the answer not in the manual?
Questions and answers