Daily Care - Toto TLP02309 Operation Manual

Daily Care

In order for the product to exert its full performance and to be used
in a sanitary condition, perform care daily.
Care for the water discharge port
Flat-blade
precision
screwdriver Notch
Hexagonal wrench
(Distance across
faces: 2.0 mm)
Water discharge
port case
Countersunk
small screw (M3 x 7)
Water
discharge
port case
Toothbrush
Water discharge port case
Push it
in with a
Leak
finger.
9
1. Loosen and remove the
countersunk small screw
using a hexagonal wrench
(distance across faces: 2 mm).
Close the Pop-up waste without losing parts.
Block the Pop-up waste with a towel, etc
2. Insert the flat-blade precision
screwdriver in the notch between
the water discharge port case
and the spout, and remove the
water discharge port case.
3. Remove dirt and debris
caught by the wire screen
using a toothbrush, etc.
4. Assemble the water discharge port
case on the spout and lock it place
with the countersunk small screw.
Press the water discharge port case into the
spout with a finger and tighten the setscrew.
5. When mounting work is
complete, check the water
discharge port for any water
leaks.
If water discharge port case
is not mounted properly,
re-mount it.
Wiping with a cloth
●Slightly dirty
Soak a piece of cloth in cold or lukewarm
water, wring well and wipe away dirt
completely.
●Stubborn dirty
Wipe off dirt with a piece of cloth impregnated
with appropriately diluted neutral bath cleaner,
then blot up any residual dirt and water with a
dry piece of cloth.
Notes
Do not apply excessive loads to the
faucet.
Otherwise, the faucet may bend or break,
whereby causing damage like water leaks, etc.
10