Sensor Management; Weather Display; Toolbar - La Crosse Technology WS-2010 Software Manual

Sensor Management

After activating this menu option, a window opens which contains a list of all the
sensors used by the PC weather station. Any of the sensors can be activated
manually by clicking the respective selection field with a tick. In the same way,
this window can be used to deactivate sensors no longer required.

Weather Display

When the weather data is being recorded, the measured values can be dis-
played in a window representing the weather station parallel to the graphical
display. When this function is selected, the display window can be activated or
deactivated.
By pressing the right-hand mouse button inside the display, the window charac-
teristics can be modified.
The window settings are automatically stored so that when the window is activat-
ed again, it appears with the same characteristics and in the same position.

Toolbar

Use this command to activate and deactivate the buttons in the toolbar. The
toolbar should normally be activated to enable quick access to the respective
functions using the mouse. By deactivating the toolbar, however, the diagram
displayed can be enlarged.
34