Epson SC-S80600 Series User Manual page 59

SC-S80600 Series/SC-S80600L Series/SC-S60600 Series/SC-S60600L Series/SC-S40600 Series User's Guide
*2 This may be available in the RIP depending on the RIP software being used. Contact the RIP manufacturer for
more information.
*3 Note the following points when setting margins.
❏
Leave margins of 10 mm or more when using media edge plates. Narrower margins could result in printer printing over the
plates.
❏
If the total of the print data width and set left and right margins exceeds the printable area, a portion of the data will not be
printed.
Note:
If the following points are not observed when Media Size Check is OFF, printing may occur outside the left and right edges of
the media. Ink used outside the edges of the media will stain the inside of the printer.
❏ Ensure that the print data width does not exceed the loaded media width.
❏ When media is loaded to the left of the right side reference position, align the Print Start Position setting with the
position where the media set.
"The Printer Setup Menu" on page 107
U
Basic Operations
59