Epson SC-S80600 Series User Manual page 14

SC-S80600 Series/SC-S80600L Series/SC-S60600 Series/SC-S60600L Series/SC-S40600 Series User's Guide
E
LED lamp
The LED lamp indicates the status of the ink unit and the ink supply units inserted into their trays by lighting or
flashing, as shown below.
Lit blue : Ink is being supplied to the printer. Do not pull out the tray.
Flashing blue : It is time to stir the ink supply unit. Pull out the tray and shake it.
Lit or flashing orange: An error or warning has occurred. The type of error or warning is indicated by how the
Off : No error. You can pull out the tray if needed.
F
Tray
Insert the ink supply unit for the color indicated on the label. Place all of the trays in the ink unit.
G
Lock switch
To pull out a tray, unlock it by shifting the lock switch to the right. After placing the tray in the ink unit, lock it by
shifting the lock switch to the left.
H
Ink tube
This tube supplies ink from the ink supply units to the printer.
I
Ink tube connector
This connector connects the ink tube and the printer. This is used with the ink tube and printer connected
normally, except for when transporting the printer.
"Moving and Transporting the Printer" on page 132
U
J
Connector lock levers
Locks the ink tube connector. Do not use this after it is locked in setup.
Introduction
"Shaking" on page 74
U
lamp lights or flashes. You can check the details of the error or warning on the control
panel's screen.
14