Epson SC-S80600 Series User Manual page 11

SC-S80600 Series/SC-S80600L Series/SC-S60600 Series/SC-S60600L Series/SC-S40600 Series User's Guide
A
Print head
The print head prints by moving left and right while emitting ink. Clean at least once a month.
"Cleaning Around the Print Head" on page 67
U
B
Media edge plates
The media edge plates prevent the media riding up and keeps fibers on the cut edge of the media from touching the
print head. Position the plates at either side of the media before printing.
"Loading media" on page 30
U
C
Cutter groove
Pass the blade of a cutter (available in the market) down this groove to cut media.
"Cutting Media" on page 52
U
D
Pressure rollers
These rollers press down on the media during printing.
"Daily Cleaning" on page 64
U
E
Platen heater
The platen heater ensures that the ink adheres evenly.
"Changing the Heater Temperature and Drying Settings" on page 55
U
"Daily Cleaning" on page 64
U
F
Caps
Except during printing, these caps cover the print head nozzles to prevent them drying out. The SC-S80600 Series/
SC-S80600L Series/SC-S60600 Series/SC-S60600L Series have 2 blocks. Clean at least once a month.
"Cleaning Around the Caps" on page 67
U
G
Wiper unit
The wiper removes ink from the surface of the print head nozzles. The wiper unit is a consumable item. Replace
when a message is displayed on the control panel prompting you to do so.
"Replacing Maintenance Parts" on page 78
U
H
Flushing pad
Ink is discharged onto this pad during flushing. This is a consumable; Replace the wiper unit at the same time.
"Replacing Maintenance Parts" on page 78
U
Introduction
11