Epson SC-S80600 Series User Manual page 104

SC-S80600 Series/SC-S80600L Series/SC-S60600 Series/SC-S60600L Series/SC-S40600 Series User's Guide
*1: For the SC-S80600L Series/SC-S60600L Series only
Item
Setting Name
Media Type
Media Adjust
Auto
Manual
Feed Adjustment
Standard
500mm Pattern
Head Alignment
Advanced Settings
Using the Control Panel Menu
Parameter Explanation
Assign the media setting bank a name up to 22 half-size characters long.
Using distinctive names makes it easier to select banks for use.
Adhesive Vinyl Select the media type according to the loaded media.
The printer stores the optimum media settings according to the media
Banner
type. When the media type is changed, each setting for media registered
to the current media setting number changes to the value for the media
Film
type after changing.
Canvas
Textile
Paper/Other
This is used after performing adjustments once under the following
conditions.
Print
❏
After Auto Media Adjust is performed, banding or graininess is found
in the print results.
❏
When changing Advanced Settings after saving media settings.
Adjustment types and execution procedure U
settings (Media Adjust)" on page 48
Print
Print
Auto is not displayed when selecting Film, Canvas, Textile, or Paper/
Other in Media Type.
Print
In most situations, use the value set for each media type as it is.
When using special media or when a problem such as head striking or
banding is detected in printing results, change the default.
104
"Optimization of media