Overview Embroidery Functions; Locating The Center Of The Embroidery Design; Centering The Needle To The Embroidery Hoop; Embroidery Arm Return - Bernette DECO B70 User Manual

2022-08 EN 5020070.40A.04

Overview Embroidery Functions

1 Centering the Needle to the Embroidery
Hoop
2

Embroidery Arm Return

Locating the Center of the Embroidery Design

The embroidery hoop is positioned so that the needle is exactly above the center of the embroidery design or
the motif begin.
> Tap «Hoop Indicator/Select Hoop».
> To position the hoop so that the needle is placed exactly over the center of the embroidery design, tap
«Center of Embroidery Design».
> To position the hoop so that the needle is placed exactly over the motif start, tap «Center of Embroidery
Design» again.

Centering the Needle to the Embroidery Hoop

Relocating the embroidery hoop facilitates threading when the needle is close to the embroidery hoop.
> Tap «Hoop Indicator/Select Hoop».
> To move the embroidery hoop to the middle, tap «Centering the Needle to the Embroidery Hoop».
> Thread the upper thread.
> To move the hoop back to its previous position, push the button «Start/Stop».
Embroidery Arm Return
The embroidery arm can be positioned for storage the embroidery module.
> Tap «Hoop Indicator/Select Hoop».
> Remove the embroidery hoop.
> To move the embroidery arm horizontally to the left, tap «Move Hoop to the Left».
1
2
3
4
3
4
Embroidery preparation
Grid On/Off
Center of Embroidery Design
43