Hyundai HCOMBIBP50 Instructions Manual page 7

b) Ensure that the hedge trimmer is correctly located in a designated working position before
starting the engine.
c) While operating the hedge trimmer, always ensure that the operating position is safe and
secure, especially when using steps or a ladder.
d) Do not operate the hedge trimmer with a damaged or excessively worn cutting device.
e) To reduce fire hazards, keep the engine and silencer free of debris, leaves and excessive
lubricant.
f) Always ensure that all handles and guards are fitted when using the hedge trimmer.
Never attempt to use an incomplete hedge trimmer or one fitted with an unauthorized
modification.
g) Always use two hands to operate a hedge trimmer fitted with two handles.
Maintenance and storage
a) When the hedge trimmer is stopped for servicing, inspection or storage, shut off the
power source, disconnect the spark plug wire from the spark plug and make sure all
moving parts have come to a stop. Allow the hedge trimmer to cool before making any
inspections, adjustments, etc.
b) Store the hedge trimmer where the fuel vapour will not reach an open flame or spark.
Always allow the hedge trimmer to cool down before storing.
c) When transporting or storing the hedge trimmer, always fit the cutting device transport
guard.
Additional instructions
Warning - Never allow children to use the hedge trimmer.

 Work only during in the day or with a sufficient artificial light.
 Before starting to work, check the condition of the tool.
 Ensure that all the parts of the machine are well fixed and tightened.
 Control regularly that the blade of cut is in good state.
Always hold firmly the hedge trimmer with the two hands.

Never take or hold the hedge trimmer by the blade.

Maintain clothing out of reach blade as well with the stop as under operation.

 Keep the device distant from all shapes of sparks, flames and flammable materials.
 Control that the working areas are free from all shapes of obstacles.
 Work with precaution, be not distracted.
 Do not use the tool when you are under the influence of alcohol, meds or drugs, and
where you are sick.
 Dry all possible gasoline traces by using a dry rag.
In case of accident, immediately stop using the machine. Check the problem. Do not use

the machine while the machine is damaged.
Operate the machine only at reasonable hours – not early in the morning or late at night

when people might be disturbed;
When blockage occurs, immediately turn off the engine with the ON/OFF button. Let the

tool cool down. Check and correct the blockage before starting again to work. Use gloves
when clearing a blockage. Restart the machine securely when the machine is totally
unblocked.
When a danger or a non-intended situation arise, stop to work immediately and switch off

the tool. Restart to work when there is no danger and you are able to work safely.
Cut before the large branches with a hand shears to avoid the blocking of the blade.

Pay attention not to cut iron wire or others.

Do not use non-recommended accessories with this tool. To replace any piece of this tool,

please contact the retailer, service agent or manufacturer.
Use only the mixture recommended by the manufacturer.

Store the mixture in a specific container for the gasoline.

Keep the device in a quite dry place and out of reach of children.

 Store the mixture only on free air or in a well-ventilated place. Handle the fuel with
precaution, it is highly flammable.
 Do not smoke or use telephone when you handle gasoline.