Hyundai HCOMBIBP50 Instructions Manual page 25

Adjusting the chain tension
The chain must not have too much clearance, but it must be possible to lift the chain a
few millimetres from the guide rail.
- Loosen the fixing screw
- Raise the end of the chain guide slightly
- Check the ease of operation of the cutting chain by turning it manually.
- Adjust the tension of the chain (4) with the screw for adjusting the chain tension so that
the chain can be lifted a few millimetres from the center of the guide rail.
- Fix the security screw.
Installation of the harness
-
Hang the harness in its dedicated location on the tube. Adjust the size of the harness properly to
have a correct working position.
The shoulder strap is equipped with an emergency release mechanism. To detach the
machine from the shoulder strap in emergency situations, pull the rope to move away
from the machine.