Filling The Tank - Hyundai HCOMBIBP50 Instructions Manual

4. FUEL
Warning: Gasoline is highly flammable. Keep the fuel in specially designed cans.
Only fill the tank outside and do not smoke during the operation. Avoid sparks or open flames near the
fuel.
Fill the tank before starting the engine. Never remove the fuel tank cap, add fuel while the engine is
still running, or while the engine is still warm.
Avoid overfilling the tank: When excess fuel has escaped, do not attempt to start the engine, but move
the machine away and avoid any sources of ignition in the vicinity until the fuel vapors have dissipated.
Fully tighten all fuel filler caps and cans.
Fill the tank on the floor.
The engine must be started at a distance of at least 3 meters from where the fuel tank has been filled.
Switch off the engine before adding fuel. Shake the mixture thoroughly before filling the tank.
Store gasoline in tanks specially designed for this purpose.
Fill the fuel tank of your appliance outdoors and avoid smoking during work.
Fill the tank before starting the engine. Never open the fuel tank cap or fill fuel tank while the engine is
running or the engine is still hot.
Avoid spilling gasoline: When gasoline is spilled, do not start the machine and move it away from
where the gasoline has spilled to avoid possible sources of fire.
Screw all caps and tank cover carefully.
This type of tool is designed to be used with unleaded gasoline. Using unleaded gasoline
prevents unnecessary pollution in the interests of your health and the protection of the
environment. Using gasoline or oil of lesser quality can damage seal rings, ducts or fuel tank.
Exhaust emissions are regulated by the basic technical characteristics of the engine and its
components (carburation, adjustment of spark plugs, control of exhaust opening and closing
times) in the absence of accessories or a catalyst during combustion.
Mix
- Use the supplied bottle to mix.
-
Put the oil and then the fuel. Mix thoroughly for at least one minute Fuel ratio (petrol: 2 stroke
engine: oil 40: 1)

Filling the tank

- Unscrew the tank cap.
- Fill the tank to 80% of its capacity.
- Screw the fuel cap back on. Clean the fuel tank cap and the area around after filling the
fuel tank. Eliminate overfill of fuel mixture by rubbing.