Table of Contents
Advertisement
Note: After the HT-MERCURY is connected to a computer it can be detected by the system using
the following names:
Model: HT-MERCURY VIDEO BAR
Camera/Speaker/Microphone: HT-MERCURY VIDEO BAR
Bluetooth Pairing
The device can be controlled using the included Bluetooth remote controller once the two have
been paired with each other.
To pair with the Bluetooth remote controller:
Press and hold the pairing button
1.
on the right side (when looking at the front
of the HT-MERCURY). The front LED will
blink blue, which indicates that the device is
in Bluetooth pairing mode.
When the HT-MERCURY is in pairing mode,
2.
press any button on the remote controller.
A pop-up on the display will include the
sentence "Remote Control Connected"
indicating
between the remote controller and the HT-
MERCURY is successful.
Hall Technologies
November 2, 2022
that
the
Bluetooth
located
pairing
Page 9 of 31
Advertisement
Table of Contents
