Panel Description
ID
Name
1
Speaker
2
Microphone
3
Lens
4
Status LED
5
USB-C
6
Pairing Button
7
USB-A
8
USB-B
9
USB-C
Hall Technologies
November 2, 2022
Description
2 x Speakers for audio signal output.
4 x Linear microphone arrays for picking up sound.
Camera lens.
LED lighting is orange and blinking: The device is booting.
•
LED lighting is solid white: The device is working properly.
•
LED lighting is white and blinking: The device is in standby mode.
•
LED lighting is white and blinking fast: The device is being upgraded.
•
LED lighting is white and blinking slowly: The device is in sleep mode.
•
LED lighting is red: The device's microphone is muted.
•
LED lighting is blue and blinking: The device is in Bluetooth pairing state.
•
Connect to the HT-Voyager for pairing.
Press and hold this button for more than 2 seconds to pair the included
Bluetooth Remote Control.
USB 3.0 Type-A port. Connect to a USB device such as touch screen.
USB 3.0 Type-B port. Connect to the room PC for soft codec meetings.
USB 3.0 Type-C port.
USB PD: 60W max
Connect to the laptop for meetings.
Page 5 of 31