Settings Page; General Settings - Hall Technologies HT-Mercury User Manual

Settings Page

GENERAL SETTINGS

UI Element
Device Name
IP Method
IP Address
Subnet
Gateway
Hall Technologies November 2, 2022
Description
Change the device name if desired. This name also acts as the name of soft AP
and the receivers of AirPlay and Miracast.
Note: The name must be 1~20 characters in length, including letters, numbers, "_"
or "-".
By default, it is set as HT-MERCURY.
Select the desired IP mode between DHCP and Static. (Default is DHCP)
Set the IP address manually if Static mode is selected.
Set Subnet Mask manually if Static mode is selected.
Set gateway address manually for the device to communicate with another
network that uses different communication protocols when Static mode is
selected.
Page 23 of 31