Table of Contents
Advertisement
Screen
CEC
One Touch Play
Standby
Apply
CEC Test
WI-FI SETTINGS
UI Element
Band
Hall Technologies
November 2, 2022
Ÿ
HDCP 2.2 or 1.4: Set the output HDCP of HDMI Out to HDCP 2.2 or 1.4.
By default it is set as Follow.
By default, the output screen is set to single screen. If two sources are connected
such as a laptop and a mobile device the setting Split Screen can be selected to
show both sources side by side.
Click to enable/disable CEC control on display.
Default setting: Enable
The display will turn on with the correct CEC command when a source is connected
to HT-MERCURY.
The display will turn off with the correct CEC command when the HT-MERCURY
goes into standby mode.
Click to apply setting changes.
Used to test the code entered for One Touch Play or Standby.
Description
•
5G: Configure the device's frequency band as 5GHz.
•
2.4G: Configure the device's frequency band as 2.4GHz.
Page 25 of 31
Advertisement
Table of Contents
