Table of Contents
Advertisement
The following briefly introduces the functions of the remote controller buttons.
Hall Technologies
November 2, 2022
Buttons
Description
Press and hold the remote's Bluetooth button for 2 seconds
to enable the HT-MERCURY to start pairing with other third-
party Bluetooth devices. (This function will be available in
Bluetooth
further versions.)
Press to answer the phone (only available when connected to
a cellphone via Bluetooth).
Answer
Press to hang up the phone (only available when connected
to a cellphone via Bluetooth.
Hang up
Press to return the default camera view to the home view
Ÿ
(only available when Tracking mode is off).
Press and hold the home button for 2 seconds to show the
Ÿ
Home
OSD which includes the IP address, model name, etc. This
will be displayed for 10 seconds before disappearing.
Press to perform the ePTZ functions, such as panning, tilting,
and zooming (only available when Tracking mode is off).
Navigation
Press and hold 3 seconds to save the current camera view
Ÿ
to preset 1 or 2.
Press to toggle the camera view to preset 1 or 2. (Only
Presets
Ÿ
available when Tracking mode is off.)
Press to toggle between microphone mute and unmute.
Mute/Unmute
Press to adjust the volume.
Press and hold to adjust the volume continuously.
Volume
Press to toggle between Auto Framing, Speaker Tracking,
Presenter Tracking and Manual.
Tracking mode
Press to adjust the zoom.
Press and hold to adjust the zoom continuously.
Zoom
Press and hold the combination buttons for 3 seconds to pair
with a cellphone. (This function will be available in future
+
versions).
Page 10 of 31
Advertisement
Table of Contents
