Advertisement
Mounting Options
Flat Mount
Mounting
Ring and Nut
Clamp
M2
Flat
Head
Mount
Mounting
Unit
Bezel
Substrate
Surface Mount
Mounting
Ring and Nut
Surface
M2
Surface
Mounting
Mount
Head
Mount
Cover
Unit
Gasket
Substrate
NOTE: During
Surface
installation use
Mount
cover to align the
Bezel
bezel and gasket
and Seal
Mounting Templates
Flat Mount
Cut Line
Surface Mount
Cut Line
3.34" (84.8mm)
3.03" (77mm)
Flat mount bezel edge
Ø2.125"
(54mm)
3.40" (86.5mm)
WARNING
The WARNING symbol refers to possible injury to
the user or significant damage to the monitor if
the user does not follow the procedures.
CAUTION
The CAUTION symbol refers to restrictions and
rules with regard to preventing damage.
WARNING
If you are not knowledgeable about electrical
systems, have an electrical professional install this
unit. The diagrams in these instructions pertain to
the installation of the unit and not to the overall
wiring of the vessel.
Verify that no other DC or AC sources are connected
to the vessel's wiring before installing the unit.
CAUTION
The back of the unit is not waterproof. Do not
install where the back of the monitor is exposed
to water.
Warranty
The M2 OLED Digital Meters come with a 5 year
manufacturer's warranty. This means the meter is
warranted to be free from defects in materials or
workmanship for 5 years from the date of first
purchase. The warranty is limited solely to the cost
of repair or replacement of the M2 Meter product.
Costs associated with labor or shipping of the
defective parts are not covered.
Blue Sea Systems cannot accept liability for damage
due to the misuse of the M2 Meter.
Advertisement
