Table of Contents
Advertisement
Commissioning
Positioning
⚫ Position the solar panel in a location with the strongest possible strong and long-
lasting solar radiation.
⚫ Align the panel so that it is exposed to direct sunlight for the longest possible time.
Usually, depending on local conditions, a higher position with an orientation to the
south is suitable for this.
Use
⚫ Using a charge controller, connect the solar panel to a power storage device, such
as a DC12V battery, or to a load.
NOTE:
The charge controller controls the current flow and charging process and prevents
current backflow from the battery to the solar panel. From the battery to the solar
panel. In addition, on cloudy days, only a fraction of the nominal rated power is
achieved.
CAUTION!
If you use the solar panel on or in the car or in the car, do not use it in traffic!
Solar panel
TX-214
The solar panel is from factory connect with the charge controller. The solar panel
delivers about max.18V and max. 2.78A. Which the charge controller switches to the
optimal charging current.
NOTE: You need to set the charge controller to the correct parameter for optimized
charging of your used power storage.
TX-215
The solar panel is from factory connect with the charge controller. The Solar panel
delivers about max.18V and max. 5.56A. Which the charge controller switches to the
optimal charging current. Further are the both solar panels each 50W are connected
in series for the optimizes voltage input for the charge controller.
NOTE: You need to set the charge controller to the correct parameter for optimized
charging of your used power storage.
7
Model: TX-214,TX-215; Article No. 5023,5024; 10/2022
Advertisement
Table of Contents
