Print Settings (Windows) - Brother PJ-822 User Manual

Home > Create and Print Documents Using Your Computer
(Windows/Mac) > Print Settings (Windows)

Print Settings (Windows)

>> Basic Tab
>> Advanced Tab
>> Print Profiles Tab
Basic Tab
1. Paper Type
Specify the type of paper that is loaded.
2. 2-ply Mode
Specify the setting for using 2-ply paper.
3. Roll Printer Case
Specify the setting for using the optional roll printer case. Depending on the selected option, you can adjust
the feed value or amount of paper retraction for the roll printer case.
Option
Printer Default
None
PA-RC-001
PA-RC-001 (Without Anti Curl)
PA-RC-001 (Short Feed)
4. Form Feed Mode
Specify how the printer responds to form feed commands received from any source.
No Feed/Feed Margin
If Feed Margin is set to 0, paper is not fed at the end of a job. If a value is entered for Feed Margin, paper
is fed at the end of the job in the amount of that value. Use this setting when printing on non-perforated roll
paper. Make sure to set Paper Type to Roll.
> Print a Document Using the Printer Driver
1
2
3
4
5
6
7
8
9
Description
Select this option when using the printer settings as-is.
Select this option when not using the roll printer case.
Select this option when using the anti-curl mechanism
while using the roll printer case.
Select this option when not using the anti-curl
mechanism while using the roll printer case.
Using the roll printer case with paper passed through
the anti-curl mechanism causes the paper to have
pressure marks. Use this option to make sure the
pressure marks are not printed.
57