Table of Contents
Advertisement
2. Operations
2.1. Notice before using
① The user is advised to start the water pump before the heat pump, and turn off the
② Check firstly for any water leakage of piping connection, then power on, press the
heat pump before the water pump for long life circle.
ON/OFF button of the heat pump, and set suitable temperature.
2.2. Operation instructions
Symbol
Note:
① You may set the desired water temperature from 18 to 35℃.
② The
on the right shows the inlet water temperature. The
③ After you turn on the heat pump, the fan will start to run in 3 minutes. In another 30
set temperature by pressing
seconds, the compressor will start to run.
④ During heating, the
Designation
Power ON/OFF
Press to power on or off the heat pump
Mode
Press to select Smart/Silence mode
Up/ Down
Press to set desired water temperature
will be light.
Operation
buttons at the same time.
- 4 -
For users
on the left shows the
Advertisement
Table of Contents
