Table of Contents
Advertisement
OPERATING THE MONITOR
To create the best picture, your iiyama LCD monitor has been preset at the factory with the
COMPLIANT TIMING shown on page 26. You are also able to adjust the picture by following the button
operation shown below. For more detailed adjustments, see page 19 for SCREEN ADJUSTMENTS.
Press the
Button to start the On Screen Display (OSD) feature. There are
additional Menu items which can be switched by using the
Select the Menu item which contains the adjustment icon relating to the adjustment
you want to make. Press the
desired adjustment icon.
Press the
Button again. Use the
adjustment or setting.
Press the
Button to leave the menu, and the settings you just made would be
automatically saved.
For example, to correct for vertical position, select Menu item of Manual Image Adjust and then
press the
Button. Then, select H./V.Position by using the
Auto Image Adjust
Picture Adjust
Input Select
Audio Adjust
Color Adjust
Information
Manual Image Adjust
Setup Menu
Memory Recall
1 : E x i t
An adjustment page appears after you press the
/
Buttons. Press the
position settings. The vertical position of the overall display should be changing accordingly
while you are doing this.
Press the
Button lastly, it ends, all changes are saved in the memory.
NOTE
When button operations are aborted during adjustment, On-Screen Display disappears
when the time set for the OSD Time Out has passed. Also, the
return previous menu and turn off the On-Screen Display.
Any changes are automatically saved in the memory when the On Screen Display
disappears. Turning off the power should be avoided while using the Menu.
Adjustments for H./V. Position, Clock and Phase are saved for each signal timing. Except for
these adjustments, all other adjustments have only one setting which applies to all signal timings.
Auto Image Adjust
Picture Adjust
Input Select
Audio Adjust
Color Adjust
Information
Manual Image Adjust
Setup Menu
Memory Recall
1 : E x i t
Button. Then, use the
/
S e l e c t : 2
1 : E x i t
Button. Then, select V. Position by using the
Button again. Then, use the
Manual Image Adjust
H./V. Position
H. Position
50
▲
V. Position
50
▲
1 : E x i t
/
Buttons.
S e l e c t : 2
/
Buttons to highlight the
Buttons to make the appropriate
/
Buttons.
Manual Image Adjust
H./V. Position
Clock
Phase
Sharpness
Video Mode Adjust
Blue Light Reducer
S e l e c t : 2
/
Buttons to change the vertical
S e l e c t : 2
button can be used to
OPERATING THE MONITOR 11
Advertisement
Table of Contents
