Cloning Radios; Cloning With A Multi Unit Charger (Muc) - Motorola XT225 User Manual

CLONING RADIOS

You can clone XT225 radio profiles from one
Source radio to a Target radio by using any one
of these 3 methods:
• Using a Multi Unit Charger (MUC- optional
accessory),
• Using two Single Unit Chargers (SUC) and a
Radio-to-Radio cloning cable (optional
accessory),
• the CPS (free software download)

Cloning with a Multi Unit Charger (MUC)

Pocket 1
"CLONE" symbol Pocket 2
Pocket 4
"CLONE" symbol Pocket 5
To clone radios using the MUC, there must be
at least two radios:
• a Source radio (radio which profiles will be cloned
or copied from) and
• a Target radio (the radio which profile will be
cloned from the source radio.)
The Source radio has to be in Pocket 1 or 4
while the Target radio has to be in Pocket 2 or
5, matching in the MUCs pockets by pairs as
follows:
• 1 and 2 or,
• 4 and 5.
When cloning, the MUC does not need to be
plugged into a power source, but ALL radios
require charged batteries.
1. Turn ON the Target radio and place it into one of
the MUC Target Pockets
2. Power the Source radio following the sequence
below:
• Hold the PTT button and SB2
27
English