Panasonic KX-TG6642C Operating Instructions Manual page 20

Making/Answering Calls
base unit and talk using the
speakerphone.
4
When you finish talking, press
MOFFN.
Note:
R In step 2, if you do not place the
handset on the base unit within 1
minute, the power back-up mode
turns off. In this case, press MOFFN on
the handset and dial the phone
number. Then try again from step 2.
n When 2 or more handsets are
registered:
You should leave one handset on the
base unit for supplying the power,
and use another handset for making
calls. For the operation, please see
"Making calls", page 15.
Note:
R During a call with the handset placed
on the base unit (power back-up
mode), the call may be disconnected
if you touch the handset. In such
case, try to call back.
R The range of the base unit is limited
during a power failure. Please use the
handset close to the base unit.
Making a call using the redial list
n When only 1 handset is registered:
1
Lift the handset.
2
MREDIALN or MEN REDIAL
3
MbN: Select the desired phone
number.
4
Within 1 minute, place the
handset on the base unit.
R Wait until speakerphone is
turned on automatically and
the call is made.
20
n When 2 or more handsets are
registered:
You should leave one handset on the
base unit for supplying the power,
and use another handset for making
calls.
For the operation, please see
"Making a call using the redial list",
page 15.
Making a call using the shared
phonebook
Only when 2 or more handsets are
registered to the base unit, you can
use the shared phonebook feature
during a power failure.
You should leave one handset on the
base unit for supplying the power, and
use another handset for making calls.
For the operation, please see "Finding
and calling from a phonebook entry",
page 23.
Answering calls during a
power failure
n When only 1 handset is registered:
1
When the unit rings, keep the
handset on the base unit and
press M N or M N.
R Speakerphone is turned on.
2
When you finish talking, press
MOFFN.
n When 2 or more handsets are
registered:
When the unit rings, use a handset
which is not supplying power to the
base unit. For the operation, please
see "Answering calls", page 16.
R Do not use or lift the handset
which is placed on the base unit
during power back-up mode.
Note:
R During a call with the handset placed
on the base unit (power back-up