Intended Use; Symbols - Conrad Electronic Bravo Scan 250 Operating Instructions Manual

Intended use

The Bravo Scan 250 DMX Scanner is used to generate light effects in light show equipment, party rooms, etc. and
is controlled using the built-in controller or an external DMX controller.
This product is only approved for connection to 230 V~/50 Hz AC power via an earthed mains socket.
The DMX connection may only be connected to suitable DMX controllers.
It can only be used in closed rooms, and therefore not outdoors. Contact with moisture, such as in bathrooms, must
be avoided.
Any use other than the one described above will damage the product. Moreover, this involves dangers such as short-
circuits, fire, electric shock, etc.
The product must not be modified or converted, and the casing must not be opened.
Observe all the safety and mounting instructions contained in these operating instructions.

Symbols

The lightening symbol in a triangle warns you against unprotected live components or
elements inside the housing or „live" connection points. Coming into contact with these
components or connection points may be fatal.
Cables connected to such connection points may only be connected by an expert or you have
to use ready to connect cables.
The device contains no parts that should be serviced by the user. Therefore, do not open the
device.
The exclamation mark symbol on the device indicates that the user should read these operating
instructions prior to using the product.

The "Hand" symbol indicates special tips and operating information.
The F symbol indicates that the device is suitable for direct attachment on normally flammable
F
surfaces.
This symbol indicates the minimum distance to the illuminated surface.
...m
20