Boiler - Viessmann B1KE Combi Series Installation And Service Instructions Manual

Vitodens 100-W, B1HE/B1KE Combi Installation/Service
General
(continued)
1098.5 "Calorific value"
Setting
10,0000
5.0000 to 40.0000
1504.0 "Source for date and time"
Setting
Local 0
1
2241.0 "Source outside temperature sensor "
Setting
1

Boiler

521.0 "Interval in burner hours run until next maintenance"
Setting
0
0 to 25500
522.3 "Interval until next maintenance"
Setting
0
1
2
3
4
5
596.0 "Maximum heating output"
Setting
100
0 to 100
597.0 "Limit, max. heating output for DHW heating"
Setting
100
0 to 100
Explanations
Value is provided on the gas supplier's bill. Used for gas consumption data.
Calorific value adjustable from 5.0000 to 40.0000 kWh/m
If you don't have a supplier's bill
- Conversion factor for Natural Gas: 1kWh/m3=96.6 BTU/ft3
- Conversion factor for Liquid Propane Gas:25.8742 kWh/m3=2500 BTU/ft3
Explanations
Selection of source for date and time
The setting depends on the boiler and accessories.
Factory setting: The date and time are adopted from the control unit.
Internet protocol (see parameter "508.0")
Explanations
Hardwired
Explanations
Number of burner hours to run until next service
Burner hours until next service adjustable from 0 to 25500
Explanations
Interval until next maintenance
No interval selected
3 months
6 months
12 months
18 months
24 months
Explanations
A limit can be set on the maximum heating output for heating operation.
Heating output in the factory setting 100%
Adjustable from 0 to 100%
Explanations
A limit can be set on the maximum heating output for DHW heating.
Heating output in the factory setting 100%
Adjustable from 0 to 100%
System Configuration (parameters)
Note: Parameter values in bold are factory settings.
3 in increments of 0.0001
63