Parsec Technologies Bernese Mountain Dog A Installation Instructions Manual page 17

Step 3: Connect the antenna to a computer.
A. Use an ethernet cable to connect a computer to one of the RJ-45 ports on the case that are
connected to the LAN ports on the router.
Step 4: Login to Cradlepoint NetCloud.
A. Open a web browser on the computer and type 192.168.0.1 into the address bar. This will bring up
the Cradlepoint NetCloud login, shown in Figure 16.
B. Login to Cradlepoint NetCloud. The username is "admin", and the password is found on the router,
shown in Figure 17.
Bernese Mountain Dog
Installation Instructions
Figure 16: Access Cradlepoint NetCloud.
Figure 17: Cradlepoint NetCloud Login Password
Page 17 of 20