Advertisement
Quick Links
BERNESE MOUNTAIN DOG
Installation Instructions
The Bernese Mountain Dog is a low-profile, nine-in-one, 5G antenna with MIMO LTE, MIMO WIFI, and
GPS/GNSS built into a portable, waterproof enclosure. This rugged, omni-directional antenna works on
most of the common North American LTE bands with high efficiency. The Bernese Mountain Dog is
optimized for LTE isolation.
Table of Contents
Antenna Versions ........................................................................................................................................................................................ 2
Required Tools & Accessories ................................................................................................................................................................ 3
Battery and Router Installation ............................................................................................................................................................. 4
Connection ..................................................................................................................................................................................................... 6
Final Assembly .............................................................................................................................................................................................12
Antenna Setup ............................................................................................................................................................................................ 16
Battery Operation and Safety Guidelines....................................................................................................................................... 19
Advertisement
Related Manuals for Parsec Technologies Bernese Mountain Dog A
Summary of Contents for Parsec Technologies Bernese Mountain Dog A
-
Page 1: Table Of Contents
BERNESE MOUNTAIN DOG Installation Instructions The Bernese Mountain Dog is a low-profile, nine-in-one, 5G antenna with MIMO LTE, MIMO WIFI, and GPS/GNSS built into a portable, waterproof enclosure. This rugged, omni-directional antenna works on most of the common North American LTE bands with high efficiency. The Bernese Mountain Dog is optimized for LTE isolation. -
Page 2: Antenna Versions
Antenna Versions The Bernese Mountain Dog case antenna comes in three versions – A, G, and L – with different features, listed below. Bernese Mountain Dog A Bernese Mountain Dog G Bernese Mountain Dog L • AC Power Port • 4x RJ-45 Ports •... -
Page 3: Required Tools & Accessories
• The table below lists the required accessories for the A, G, and L versions of the Bernese Mountain Dog case antenna. Bernese Mountain Dog A Bernese Mountain Dog G Bernese Mountain Dog L • NEMA Male to Female Adapter •... -
Page 4: Battery And Router Installation
Battery and Router Installation Step 1: Mount the ChargeTech 27K battery pack to the cover plate (Bernese Mountain Dog G only). A. This step only applies to the Bernese Mountain Dog G. B. Remove the cover plate from the enclosure. C. - Page 5 Step 2: Mount the router to the cover plate. A. If not already done, remove the cover plate from the enclosure. B. Remove the film from the display cover(s) and apply to the cover plate. C. For IBR900 router, install the router onto the COR Extensibility Dock. Align the router with the holes on the cover plate.
-
Page 6: Connection
Connection Figure 5: Connection Diagram for Bernese Mountain Dog A & L Bernese Mountain Dog Page 6 of 20 Installation Instructions... - Page 7 Figure 6: Connection Diagram for Bernese Mountain Dog G Bernese Mountain Dog Page 7 of 20 Installation Instructions...
- Page 8 Step 1: Connect the antenna cables to the router. A. Use canned air or isopropyl alcohol to clean all the connectors to ensure that there is no dust in the terminals. B. Connect the antenna cables to the designated terminals on the router, as shown in the tables and images below.
- Page 9 A. Connect the router power supply to the power supply port on the router, shown in Figures 7 and 8, and plug it into the NEMA male to female adapter, provided in the kit. B. For Bernese Mountain Dog A & L, plug the NEMA male to female adapter into the AC power port on the case.
- Page 10 Step 4: Connect the router to the RJ-45 ports on the case using ethernet cords (Bernese Mountain Dog G & L only). A. This step only applies to the Bernese Mountain Dog G and L. B. Connect the provided ethernet cords to the LAN ports and WAN port on the router, shown in Figures 7 and 8.
- Page 11 Step 5: Connect the USB-A port on the case to the battery pack (Bernese Mountain Dog G only). A. This step only applies to the Bernese Mountain Dog G. B. Plug the provided USB-A cord into the USB-A port on the case and the USB-A port on the battery pack, shown in Figure 10.
-
Page 12: Final Assembly
Ensure that the antenna cables are not excessively bent (1/2” minimum bend radius). Figure 11: Fully Connected 9in1 Bernese Mountain Dog A with Cradlepoint IBR900 Router and COR Extensibility Dock Bernese Mountain Dog... - Page 13 Figure 12: Fully Connected 9in1 Bernese Mountain Dog G with Cradlepoint IBR900 Router and COR Extensibility Dock Bernese Mountain Dog Page 13 of 20 Installation Instructions...
- Page 14 Figure 13: Fully Connected 9in1 Bernese Mountain Dog L with Cradlepoint IBR900 Router and COR Extensibility Dock Bernese Mountain Dog Page 14 of 20 Installation Instructions...
- Page 15 Step 2: Fasten the cover plate to the case. A. Place the cover plate onto the bottom half of the case. Ensure that no cables are pinched between the cover plate and the case. B. Fasten the cover plate to the case using the twenty-one PTA0351 black oval head screws with washers provided in the kit, as shown in Figure 14.
- Page 16 Figure 15: Open the fan and vent caps. (Bernese Mountain Dog G & L) Step 2: Power on the antenna. A. For Bernese Mountain Dog A & L, connect a power cord to the AC outlet on the outside of the case.
- Page 17 Step 3: Connect the antenna to a computer. A. Use an ethernet cable to connect a computer to one of the RJ-45 ports on the case that are connected to the LAN ports on the router. Step 4: Login to Cradlepoint NetCloud. A.
-
Page 18: Antenna Setup
Step 5: Select the antenna in the device list on Cradlepoint NetCloud. A. On the left side of the page, select STATUS. From the dropdown menu, select INTERNET and then CONNECTIONS. B. In the Device List table, select the option with a cellular SIM, as shown in Figure 17. Figure 17: Select the device with a cellular SIM in Cradlepoint NetCloud. -
Page 19: Battery Operation And Safety Guidelines
Battery Operation and Safety Guidelines A. To manually power ON/OFF, press and hold the power button (located on the top of the unit) for 3 seconds. All LED lights/display should turn ON/OFF. B. Holding the power button for longer than 3 seconds will cause the battery pack to enter programming mode. - Page 20 This document gives the detailed instructions to install an antenna to the best of our knowledge. This document is for general information only. It cannot be used as a warranty. Parsec Technologies Inc. will not accept any liability for any damage caused by an antenna due to unknown variables.