Bush DLED50UHDHDRSB Instruction Manual page 38

Advanced features
Getting the most from your TV
Parental
Date/Time
Sources
Netflix
Samba ACR
Device Settings
CEC
CEC Auto Power
On
ALLM
No Signal Timer
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105, a Bush enquiry line.
36 Advanced features
Enter correct PIN to change parental settings. You can easily adjust Menu Lock, Maturity
Lock, Child Lock ,Guidance or Internet Lock in this menu. You can also set a new PIN
or change the Default CICAM PIN using the related options.
Note: Some menu options may not be available depending on the country selection
in the First Time Installation. Default PIN could have been set to 0000 or 1234. If you
have defined the PIN (is requested depending on the country selection) during the First
Time Installation use the PIN that you have defined.
Sets date and time.
Edit the names, enable or disable selected source options. There are also Regular and
Enhanced options available for HDMI sources. These options are affecting the colour
settings of the selected HDMI source. To be able to watch 4K or HDR/HLG images from
an HDMI source related source setting should be set as Enhanced if the connected device
is compatible with HDMI 2.0a and subsequent versions. Set as Regular if the connected
device is HDMI 1.4 compatible. Set accordingly or disable the related HDMI source by
setting as Disabled.
If this feature is supported by your TV, you can view your ESN(*) number and deactivate
Netflix.
(*) ESN number is an unique ID number for Netflix, created especially to identify your TV.
Note: For 4K video streaming, a minimum 25Mb/s internet connection speed
is required – For an example of the requirements for streaming 4K content you
may find more information on the Netflix website (https://help.netflix.com/en/
node/13444). When you start to stream video content via the internet the quality
of your connection will be analysed and the full HD or 4K quality may take a
short time to be realised, or in the event of a slow connection not be possible.
You should check your internet capabilities with your internet provider if you are
at all unsure.
Samba Interactive TV powers recommendations and other apps by gathering data
regarding consumption of specific on-screen content to enhance your viewing
experience. Using this option you can access Samba Interactive TV settings menu, review
Samba TV's Terms of Service, Privacy Policy and manage your advertising preferences,
etc. Internet connection will be required in order to access HTML based settings. You can
enable or disable Interactive TV at any time from the Settings>System>Privacy>Privacy
Settings menu by checking or unchecking the check box next to the related item. This
option may not be available depending on the selected country during the First Time
Installation process, the model of your TV and its features.
With this setting you can enable and disable CEC functionality completely. Press Left or
Right button to enable or disable the feature.
This function allows the connected HDMI-CEC compatible device to turn on the TV and
switch to its input source automatically. Press Left or Right button to enable or disable
the feature.
ALLM (Auto Low Latency Mode) function allows the TV to activate or deactivate low
latency settings depending on playback content. If this option is enabled the picture
mode will be set to Game automatically when ALLM mode signal is received from the
current HDMI source. Refer to Game Mode section for more information.
If your TV does not receive any input signal (e.g. from an aerial or HDMI source) for 3
minutes, it will go into standby mode. You can enable or disable this functionality by
setting this option accordingly.