Bush DLED50UHDHDRSB Instruction Manual page 43

Advanced features
Getting the most from your TV
Networked Standby Mode
Networked Standby Mode is a standard that allows
a device to be turned on or woken up by a network
message. The message is sent to the device by a program
executed on a remote device connected to the same
local area network, such as a smartphone.
To enable this feature set the Networked Standby Mode
option in the Network menu as On. It is necessary that
both the device, from which the network message will
be sent to the TV, and the TV are connected to the
same network. Networked Standby Mode feature is only
supported for Android OS devices and can only be used
via YouTube and Netflix applications.
In order to use this feature the TV and the remote device
should be connected at least once while the TV is on.
If the TV is powered off, the connection should be re-
established, the next time it is switched on. Otherwise this
feature will be unavailable. This does not apply, when the
TV is switched into the standby mode.
If you want your TV to consume less power in standby
mode, you can disable this feature by setting the
Networked Standby Mode option as Off.
Wireless Display
Wireless Display is a standard for streaming video and
sound content. This feature provides the ability to use
your TV as wireless display device.
Using with mobile devices
There are different standards which enable sharing of
screens including graphical, video and audio content
between your mobile device and TV.
Press the Source button on the remote and switch to
Wireless Display source.
A screen appears stating that the TV is ready for
connection.
Open the sharing application on your mobile device.
These applications are named differently for each brand,
refer to the instruction manual of your mobile device for
detailed information.
Scan for devices. After you select your TV and connect,
the screen of your device will be displayed on your TV.
Note: This feature can be used only if the mobile device
supports this feature. If you experience problems with the
connection check if the operating system version you
use supports this feature. There may be incompatibility
problems with the operating system versions which are
released after the production of this TV. Scanning and
connecting processes differ according to the program
you use.
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105, a Bush enquiry line.
Connectivity Troubleshooting
Wireless Network Not Available
• Ensure that any firewalls of your network allow the TV
wireless connection.
• Try searching for wireless networks again, using the
Network menu screen.
If the wireless network does not function properly, try
using the wired network in your home. Refer to the
Wired Connectivity section for more information on
the process.
If the TV does not function using the wired connection,
check the modem (router). If the router does not have a
problem, check the internet connection of your modem.
Connection is Slow
See the instruction book of your wireless modem to
get information on the internal service area, connection
speed, signal quality and other settings. You need to have
a high speed connection for your modem.
Disruption during playback or slow reactions
You could try the following in such a case:
Keep at least three metres distance from microwave
ovens, mobile telephones, bluetooth devices or any
other WLAN compatible devices. Try changing the active
channel on the WLAN router.
Internet Connection Not Available / Audio Video
Sharing Not Working
If the MAC address (a unique identifier number) of your PC
or modem has been permanently registered, it is possible
that your TV might not connect to the internet. In such a
case, the MAC address is authenticated each time when
you connect to the internet. This is a precaution against
unauthorised access. Since your TV has its own MAC
address, your internet service provider cannot validate the
MAC address of your TV. For this reason, your TV cannot
connect to the internet. Contact your internet service
provider and request information on how to connect a
different device, such as your TV, to the internet.
It is also possible that the connection may not be available
due to a firewall problem. If you think this causes your
problem, contact your internet service provider. A firewall
might be the reason of a connectivity and discovery
problem while using the TV in Audio Video Sharing mode
or while browsing via Audio Video Sharing feature.
Advanced features 41