Installation - Electrolux WTSL 4E200 User Manual

Hide thumbs Also See for WTSL 4E200:
Table of Contents

Advertisement

Available languages

Available languages

Problem
After the check, activate the appliance. The
programme continues from the point of in-
terruption.
If the problem occurs again, contact the
service centre.

INSTALLATION

FIXING PLATE KIT (405517114)
Available from your authorized dealer.
If you install the appliance on a plinth, se-
cure the appliance in the fixing plates.
Follow the instructions supplied with the kit.
UNPACKING
1. Use the gloves. Remove the external
film. If necessary, use a cutter.
2. Remove the cardboard top.
3. Remove the polystyrene packaging
materials.
Possible cause
If there is a big quantity of fluff
in the drum repeat this proce-
dure again and again:
Possible solution
• Clean the empty drum, the gasket
and the door with a wet cloth.
• Set a rinse cycle
• Put a wool or piled fabric cloth in the
drum.
• Set a drying cycle of 10 minutes
• Remove the old wool cloth.
If the display shows other alarm codes,
contact the service centre.
4. Remove the internal film.
5. Open the door. Remove the polystyr-
ene piece from the door seal and all the
items from the drum.
electrolux 27

Advertisement

Chapters

Table of Contents
loading

Table of Contents