Setting And Starting A Programme - Electrolux WTSL 4E200 User Manual

16 electrolux
4. To use liquid detergent, turn the flap
down.

SETTING AND STARTING A PROGRAMME

1. Turn the programme knob. The related
programme indicator comes on.
2. The indicator of button
red colour.
3. The display shows the default tempera-
ture, the spin speed and the empty in-
dicator bars of the available functions.
4. To change the temperature and/or the
spin speed, press the related buttons.
5. Set the available functions.
6. Press button
6
gramme. The indicator of button
on.
The drain pump can operate for a short
time when the appliance fills water.
The appliance adjust automatically the cy-
cle time to the laundry you have put in the
drum to have perfect washing results in
the minimum necessary time. After ap-
proximately 15 minutes from the start of
the programme, the display shows the
new time value.
INTERRUPT A PROGRAMME
1. Press button
6
2. Press button
6
programme continues.
CANCEL A PROGRAMME
1. Press button
1
gramme and to deactivate the appli-
ance.
2. Press button
1
appliance. Now, you can set a new
washing programme.
6
flashes with
to start the pro-
6
. The indicator flashes.
again. The washing
to cancel the pro-
again to activate the
With the flap in the position DOWN:
– Do not use gelatinous or thick liquid
detergents.
– Do not put more liquid detergent
than the limit showed in the flap.
– Do not set the prewash phase.
– Do not set the delay start function.
5. Measure out the detergent and the fab-
ric conditioner.
6. Carefully close the detergent dispenser.
Make sure that the flap does not cause
a blockage when you close the drawer.
The appliance does not drain the wa-
ter.
CHANGE A FUNCTION
You can change only some functions be-
fore they operate.
1. Press button
2. Change the function set.
SET THE DELAY START
1. Press button
the display shows the number of mi-
is
nutes or hours. The related symbols
comes on.
2. Press button
the countdown of the delay start.
When the countdown is completed, the
programme starts automatically.
Before you press button
appliance, you can cancel or change
the set of the delay start.
You cannot set the delay start with the
Steam programme.
CANCEL THE DELAY START
1. Press button
flashes.
2. Press button
the display shows 0'.
3. Press button
starts.
OPEN THE DOOR
While a programme or the delay start oper-
ates, the appliance door is locked.
6
. The indicator flashes.
7
again and again until
6
, the appliance starts
6 to start the
6
. The related indicator
7
again and again until
6
. The programme