Troubleshooting - Electrolux WTSL 4E200 User Manual

TROUBLESHOOTING

The start of the appliance does not occur or
it stops during operation.
First try to find a solution to the problem (re-
fer to the table). If not, contact the service
centre.
With some problems, the acoustic
signals operate and the display shows
an alarm code:
•
- The appliance does not fill with
water.
Problem
The appliance does not
fill with water.
The appliance does not
drain the water.
The appliance door is
open or not closed
correctly.
The anti-flood device is
on.
The spin phase does
not operate.
The programme does
not start.
Possible cause
The water tap is closed.
The water inlet hose is dam-
aged.
The filters in the water inlet
hose is blocked .
The water tap is blocked or is
furred with limescale.
The connection of the water
inlet hose is not correct.
The water pressure is too low.
The water drain hose is dam-
aged.
The filter of the drain pump is
blocked.
The connection of the water
drain hose is not correct.
A washing programme without
the drain phase is set.
The function Rinse & Hold is
on.
The spin phase is off.
The filter of the drain pump is
blocked.
Balance problems with the
laundry load.
The mains plug is not connec-
ted in the mains socket.
•
- The appliance does not drain the
water.
•
- The appliance door is open or not
closed correctly.
•
- The anti-flood device is on.
Warning! Deactivate the appliance
before you do the checks.
Possible solution
Open the water tap.
Make sure that the water inlet hose has
no damages.
Clean the filters. Refer to 'Care and
cleaning'.
Clean the water tap.
Make sure that the connection is cor-
rect.
Contact your local water authority.
Make sure that the water drain hose has
no damages.
Clean the filter of the drain pump. Refer
to 'Care and cleaning'.
Make sure that the connection is cor-
rect.
Set the drain programme.
Set the drain programme.
Close the door correctly.
• Disconnect the appliance.
• Close the water tap.
• Contact the service centre.
Set the spin programme.
Clean the filter of the drain pump. Refer
to 'Care and cleaning'.
Adjust manually the items in the tub and
start the spin phase again.
Put in the mains plug.
electrolux 25