Philips Avent SCF430 Manual page 8

8
English
Step 2: Cleaning
The parts can be cleaned manually or in the dishwasher.
Step 2A: Manual cleaning
1 Rinse all parts under a running tap with lukewarm water.
2 Clean all parts with a cleaning brush in warm water with some mild
dishwashing liquid.
3 Thoroughly rinse all parts under a running tap with cold clear water.
4 Leave all parts to air-dry on a clean tea towel or drying rack.
Step 2B: Cleaning in the dishwasher
Note: Food colorings may discolor parts.
1 Place all parts on the top rack of the dishwasher.
2 Put dishwashing liquid or a tablet in the machine and run a standard
program.
3 Leave all parts to air-dry on a clean tea towel or drying rack.
Step 3: Disinfecting
Caution: During disinfection with boiling water, prevent the
bottle or other parts from touching the side of the pot. This can
cause irreversible product deformation or damage that Philips
cannot be held liable for.
1 Fill a household pot with enough water to cover all parts and place all parts
in the pot. Let the water boil for 5 minutes. Make sure the parts do not
touch the side of the pot.
2 Allow the water to cool down.
3 Gently remove the parts from the water. Place the parts on a clean surface,
tea towel or drying rack to air-dry.
Assembling the breast pump
Make sure you have cleaned and disinfected the parts of the breast pump that
come into contact with milk.
Warning: Be careful, when you have disinfected the breast pump
parts by boiling them, they can be very hot. To prevent burns, only
start assembling the breast pump when disinfected parts have
cooled down.
Check the breast pump kit parts for wear or damage before use and replace
them if necessary.