Advertisement
STEP 1
1. Remove all the Screws (A) from back of console using the Phillips
Head Screwdriver (No.11), then unplug two Handpulse Cables & one
Computer Cable. Removed Ground Wire (B) from Console using the
Phillips Head Screwdriver (No.11). Remove the Screws (G) from
Console Mount using the L Allen Wrench (No.12).
2. Removed the Upper Screws (C) from the Left Upright & Right Upright,
then remove the End Cap.
3. Remove all the Screws (D) from Console Bottom Cover (Inset Image)
using the Phillips Head Screwdriver (No.11), then take off Console
Upper Cover (E).
4. Remove the Handlebar (L) & Handlebar (R) (F) using the Wrench
(No.18)
CUSTOMER SERVICE 1-888-707-1880
EMAIL: customerservice@dyaco.ca
4
Dyaco Canada Inc. 2020
Advertisement
