[Administration] Tab Page
0.
Home Setting
Home Setting
You can set the default screen displayed by pressing the [Home] button on the control panel when user
authentication is enabled. The settings vary, depending on the [Sync Setting] setting.
For the procedure for home data synchronization, refer to the following page.
P.93 "Setting Home Data Synchronization"
When [Disable] is selected from [Sync Setting]
1
2
3
When [Use Network Server for Sync] is selected from [Sync Setting]
1
2
3
4
5
6
7
8
13
When [Use MFP for Sync] is selected from [Sync Setting]
1
2
3
9
10
11
12
13
Item name
1
Public Home
2
Default Home Screen Setting
Select whether to enable or disable Public Home.
Select the Home to be displayed as the default screen when you press the
[Home] button.
User: Select this to the User Home screen.
Public: Select this to display the Public Home screen.
Description
[Administration] Tab Page 55