Table of Contents
Advertisement
3. Insert a SD card.
4. Press
5. Press
6. With your original on a clean flat surface,
slowly slide the scanner across your original.
Moving the wand scanner over the original too fast causes an error and the scanner
may stop scanning. If the scan does complete, you may notice an abnormal image.
7. Press
By default, the Preview mode is on allowing you to preview the JPG scanned image
for 2 seconds immediately after scanning. Two options appear on the screen with the
image allowing you to press
immediately (delete confirmation displays during deletion). (See page 16 to change
the Preview mode.)
PDF scans cannot be previewed; they are always saved immediately when scan is
completed.
8. Wait until the indicator light stops blinking before scanning another original.
P r ev i ew S c ann ed I mag es on L C D Scre en
You can quickly and easily preview your JPG scanned images on the LCD screen immediately
after a scan, or at any other time you can view all images individually or as a slideshow.
PDF scans cannot be previewed; they are always saved immediately when scan is completed.
Set Preview Mode
By default, the Preview mode is On, allowing you to preview the JPG scanned image for 2
seconds immediately after scanning. Two options appear on the screen with the image
allowing you to press
(delete confirmation displays during deletion).
When Preview mode is off, the JPG scanned image is saved immediately without displaying
a preview.
to turn scanner ON.
again to initiate the scan mode.
to stop the scan.
OK
to save (default) or
OK
to save (default)
Delete
to
Delete
to
the image
the image immediately
15
Advertisement
Table of Contents
